top of page
width: 8hp depth: 25mm 24ma +12v
The SEQUENTIAL DELAY GATE is an analog 8 step sequencer that triggers 2 separate gates with adjustable length. The 2nd gate has delay control, and a third gate (ALT) is output that is dependent on the other two.
Each step triggers either gate or none.
*Activate gate / CV inputs.
*Gate / trigger envelopes.
*Clock sequencers w/off time steps
ALT OUT
Outputs a gate for one of three conditions as set by the ALT switch.
The orange LED displays the gate.
OR :output is high when either the U gate or L gate is high.
NOR :output is high when neither the U gate or L gate is high.
L-TRIG: outputs a 5ms (trigger) at the leading edge of the (L) step. The delayed gate can be included in this output. (Use to double tap an envelope)
$ 300
OR
4pc CABLE SET to connect an AR CLOCK DIVIDER with either: 2 SEQUENTIAL DELAY/GATEs, or 1 with a SEQUENTIAL LOGIC/SWITCH.
$ 15
bottom of page